A common way to test adhesion properties is to carry out lap shear tests. This destructive test is used to tear substrates apart and get to know more about their bonding strength. The above photo was taken while testing PVC bonded with our Methyl Meth Acrylate 6207W which resulted in a substrate failure.
At Riëd this is one of the many methods used to test the adhesives during product development. It also occurs that we do lap shear tests on a specific substrate provided by a customer. A good deal of information is available on technical data sheets but testing for every application is always recommended. We carry out many different tests on a daily basis in our modern laboratory to support our customers.
Do you have adhesive challenges requiring our expertise? Let us know and we will happily be of service.Read more
Looking for a different color mixer tip to match your private label? We have the Savemix® mixer tip 50 ml, also available in orange, purple and blue. But that’s not all! The Savemix mixer tip has some excellent benefits compared to other mixer tips on the market.
• Perfect mixing of any adhesive
• Short length for better access to workplace
• Minimal retained volume for less chemical waste
• Less plastic waste due to its short length
Do you have any queries regarding this message? Let us know and we’ll be happy to assist you.Read more
A fast curing 2C-Epoxy which stays flexible after curing. The adhesive is very suitable as a Seam Sealer. It adheres to a wide range of substrates such as Cold rolled steel, Galvanized steel, Stainless Steel, Aluminium, Stone, Wood, PVC, ABS, and PMMA. Although it is very flexible it is sandable.
- Up to 90% elongation at break
- Open time of 10 minutes*
- Sandable in 20 minutes*
- Easy to use 1:1 ratio
- Grey colour matches the steel surface
- Easy to spread
- Shelf life of 18 months
* Based on 23 degrees Celsius
Do you have any queries following this message? Let us know and we will happily be of service.Read more
Automechanika 2018 was a huge success with visitors from no less than 48 different countries. We would like to thank everyone for taking their time and visiting our stand.
A new generation of application guns, this is an affordable tool but very durable. This application gun is a real tool that shows and performs as it should. This unique application gun will last for many more cartridges compared to all the other application guns in the market.
- Ergonomic grip
- Suitable for all 50ml cartridges
- High power so easy pressing out the adhesive
- 1:1 and 2:1 ratio
- Completely black dispenser so doesn’t show grease and dirt
- Nice view on your brand due to a shorter housing for the cartridge
Do you have any queries following this message? Let us know and we will happily be of service.
We will have a stand at the Automechanika in Frankfurt from 11.09. till 15.09.2018. You are very welcome to visit us in Hall 11.0 Nr. F37.
We are looking forward seeing you there.Read more
From now on we have available in our Plastgrip range the 2C-Polyurethane transparent. This product has the following characteristics.Read more
Automechanika 2016 was a really great success! On behalf of our team we would like to thank everyone for visiting our booth.Read more